CKI Laser AV-2 kart frame
 
LASER AV-2E for Sprint Enduro
The AV-2E is designed for Enduro sprint racing, with narrow track width, slightly longer wheel base, and no offset in front and rear track. 

This kart utilizes the same adjustable front geometry as our other AV karts.

SETUP:
Castor should be started in center position, this is approximately 9 degrees, and  each mark on plates represents 2 - degree increments.

Camber should be set 0 degrees to 0.5 negative degrees. Toe should be set straight ahead. Kart weigh out 47 to 48 percent front weight works well and neutral left to right. 

Home   History   Karts   Catalog   Engines   Sales   Bench Racer


Competition Karting Inc.
9 Austin Lane
Welcome, NC 27374
tele:1-336-731-6111
fax:1-336-731-3750
info@ckikarts.com
 


Copyright 1998-2002. All rights reserved. No part of this site may be reproduced without
the written permission of Neatconcept, Inc. and CKI
Information has been supplied by Competition Karting, Inc.. The developer has made every effort
to verify this information but cannot guarantee accuracy.

Designed and hosted by Neatconcept, Inc.to verify this information but cannot guarantee accuracy.